SteadyRest Hand Rail

The perfect hand rest for GPS input during turbulence. 

The SteadyRest is a unique 3-D printed device that attaches to the side of your Garmin or Dynon EFIS display using longer mounting screws to provide an improved axis of stability for your hand, especially while flying in turbulence. While most manufacturers provide a location somewhere around the bezel to help steady your fingers, SteadyRest provides support for your entire hand, and importantly, about 1” forward of the screen to give better precision, reach and dexterity.

The handle is mounted to the SteadyRest base with two nylon 8-32 screws (provided). It is not to be pulled with any force or damage may result, and it is clearly marked “NO PULL”. Optimized through dozens of prototypes manufactured and tested, SteadyRest is made in Ohio from ASA, acrylic styrene acrylonitrile, and a brushed stainless steel handle. ASA provides improved humidity, temperature and UV resistance versus other engineering resins - desirable in a light-plane cockpit. Looking closely, you can readily see the unique character of this fused deposition (FDM) 3-D printed part, where it is built up layer by layer on a heated plate.

A minimum of 1/4" open area alongside the EFIS is required to avoid interface with other panel components.

Available in two options: Garmin G3X G460 and Dynon Skyview 11”.

Ordering Instructions:

1.  choose your avionics display (Garmin G3X or Dynon Skyview).